Numeric sensor [NumericSensorElementName] going low (lower critical) has asserted.
This message is for the use case when an implementation has detected a
Lower Critical sensor going low has asserted.
Alert Category
Critical - Voltage
CIM Information
Prefix:PLAT
and ID:0480
Automatically Notify Support
Yes
User Action
Use one of the following procedures:
- If the specified sensor is Planar 3.3V or Planar 5V, (trained technician only)replace the system board.
- If the specified sensor is Planar 12V, check the System Management Module or xClarify Controller event log for power-supply-related issues, and resolve those issues.
- If the problem remains, replace (trained technician only)the system board.