Use the following procedures to replace an assembled processor
and heat sink, known as a processor-heat-sink module (PHM), a processor,
or a heat sink.
Attention: Before you begin replacing a processor,
make sure that you have an alcohol cleaning pad (part number 00MP352)
and gray thermal grease (part number 41Y9292).
Important: The processor in your server can throttle in response
to thermal conditions, temporarily lowering its speed to reduce heat
output. In instances where a few processor cores are throttled for
an extremely short time period (100 ms or less), the only indication
might be an entry in the operating system event log with no corresponding
entry in the system XCC event log. If this situation occurs, the event
can be ignored and processor replacement is not required.