FQXSPBR4008I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start.

Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start.

This message is for the use case where a user restores a Management Controller configuration from a file and the restoration fails to start.

Severity

Error

Alert Category

System - Other

Serviceable

No

CIM Information

Prefix:IMM

and ID:0138

SNMP Trap ID

22

Automatically Notify Support

No

User Response

Complete the following steps until the problem is solved:
  1. Turn off the server and disconnect it from the power source. You must disconnect the server from AC power cycle to reset the XCC.
  2. After 45 seconds, reconnect the server to the power source and turn on the server.
  3. Retry the operation.