FQXSPPU0004M : [ProcessorElementName] has Failed with FRB1/BIST condition.

[ProcessorElementName] has Failed with FRB1/BIST condition.

This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST condition.

Severity

Error

Alert Category

Critical - CPU

Serviceable

Yes

CIM Information

Prefix:PLAT

and ID:0044

SNMP Trap ID

40

Automatically Notify Support

Yes

User Response

Complete the following steps:
  1. If the processor or firmware was just updated, check the Lenovo support site for an applicable service bulletin or firmware update that applies to this processor error.
  2. If there are multiple processors, swap processors to move affected processor to another processor socket and retry.
  3. If problem follows the affected processor, or this is a single processor system, replace the processor.
  4. Inspect the processor socket on each processor removal and replace system board first if the processor socket is damaged or mis-aligned pins are found.
  5. Replace the system board.