Install the front handle

Use this information to install the front handle.

Before you install the front handle:
  1. Read Installation Guidelines to ensure that you work safely.

To install the front handle, complete the following steps:

Watch the procedure. A video of the installation process is available:

  1. Orient the front handle so that the release latch is toward the middle of the compute node.
  2. Align the hole in the handle with the hole on the compute node where the handle is installed.
  3. Using a T15 Torx screwdriver, install a new screw to secure the handle.
    Figure 1. Front handle installation
    Front handle installation
After you install the front handle, complete the following steps:
  1. Install the compute node into the chassis (see Install the compute node in the chassis ).

  2. Power on the compute node.