Remove the front handle

Use this information to remove the front handle.

Before you remove the front handle, complete the following steps:
  1. Read Safety and Installation Guidelines to ensure that you work safely.

  2. Power off the corresponding compute node that you are going to perform the task on.

  3. Remove the compute node from the chassis (see Remove the compute node from the chassis).

  4. Carefully lay the compute node on a flat, static-protective surface with the cover side down, orienting the compute node with the bezel pointing toward you.

To remove the front handle, complete the following steps:

Watch the procedure. A video of the installation process is available:

  1. Locate the screw that attaches the handle to the compute node.
  2. Using a T15 Torx screwdriver, remove the screw from the front handle.
    Figure 1. Front handle removal
    Front handle removal

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.