Diagnostic image cannot be launched as "Console Redirection" is enabled
User Action
- Disable “Configure Console Redirection” in UEFI Setup by following below steps:
- Go to F1 Setup -> System Settings -> Devices and I/O Ports-> Console Redirection Settings ->
- Select "Console Redirection"
- Change the setting to “Disable” and save
- Next reboot the system.
- Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on AC. After AC power is restored, power on the host system.
- If the problem persists, contact technical support.