FQXSFSM0005M : An error occurred while saving UEFI settings to the BMC.

An error occurred while saving UEFI settings to the BMC.

Severity

Warning

User Response

Complete the following steps:
  1. Use F1 Setup, Verify and Save Settings to recover settings.
  2. Reset BMC from SMM or BMC GUI.
  3. AC cycle the system.
  4. Check Lenovo support site for an applicable service bulletin or firmware update that applies to this error.
  5. Reflash BMC Firmware.
  6. Remove and re-install CMOS battery for 30 seconds to clear CMOS contents.
  7. Replace the system board.