Install hardware options in the compute node

Use the following information to remove and install the options in the compute node.

Remove a compute node from the enclosure
Use this procedure to remove a compute node from the D2 Enclosure.
Remove the compute node cover
Use this procedure to remove the compute node cover.
Remove the air baffle
Use this procedure to remove the air baffle.
Remove the M.2 backplane
Use this information to remove the M.2 backplane.
Install an M.2 drive in the M.2 backplane
Use this information to install an M.2 drive in the M.2 backplane.
Install the KVM breakout module
Use this information to install the KVM breakout module.
Install a hot-swap drive
Use this information to install a hard disk drive.
Install a memory module
The following notes describe the types of DIMMs that the node supports and other information that you must consider when you install DIMMs.
Install a RAID adapter into the compute node
Use this information to install a RAID adapter into the compute node.
Install the M.2 backplane
Use this information to install the M.2 backplane.
Install a processor-heat-sink module
The processor and heat sink are removed together as part of a processor-heat-sink-module (PHM) assembly. PHM installation requires a Torx T30 driver.
Install the air baffle
Use this procedure to install the air baffle.
Install the compute node cover
Use this procedure to install the compute node cover.
Install a compute node in the enclosure
Use this procedure to install a compute node in the D2 Enclosure.

Parent topic: Install solution hardware options