Use this information to install the fan cover.
To avoid possible danger,
read and follow the following safety statement.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts
away.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might
cause heating when shorted with metal, which might result in spattered
metal, burns, or both.
Before you install the fan cover:
Read the following section(s) to ensure that you
work safely.
Loosen the screws and slide the enclosure out of the rack.
Complete the following steps to install the fan cover.
Watch the procedure
- A video of the installation and removal process is available
at YouTube
Figure 1. Fan cover installation
- Orient the cover so that the posts on the inside of the
cover slide into the slots on the enclosure.
- Slide the fan cover forward to the closed position until
it clicks into place.
- Turn the thumbscrews clockwise.
- To install a system service label (which needs to be ordered
separately), align the label on the cover, remove the backing, and
press the label on the cover.
After you install the fan cover, complete the following
steps.
Push the enclosure into the rack and fasten the
screws.