Remove the cable management arm

Use this procedure to remove the cable management arm.

Before you remove the cable management arm:
  1. Read the following section(s) to ensure that you work safely.

Complete the following steps to remove the cable management arm.

Watch the procedure. A video of the installation process is available:
Figure 1. Cable management arm removal
Cable management arm removal
Note: Your cable management arm might be different from the illustrations if you mounted the cable management arm to the opposite side.

  1. Pull the two outer mounting clip release latches backward to disengage the cable management arm.
  2. Pull the inner mounting clip release latch backward to disengage the cable management arm.
  3. Remove the cable management arm out of the slide rails.