Remove the compute node cover

Use this procedure to remove the compute node cover.

Before you remove the compute node cover:
  1. Read the following section(s) to ensure that you work safely.
  2. Turn off the corresponding compute node that you are going to perform the task on.

  3. Remove the node from the enclosure. See Remove a compute node from the enclosure

Complete the following steps to remove the compute node cover.

Watch the procedure. A video of the installation process is available:
Figure 1. Compute node cover removal
Compute node cover removal

  1. Push the cover-release latch on the top of the node cover.
  2. Slide the cover toward the rear of the node until the cover has disengaged from the node; then, lift the cover away from the node.

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.