086F01C9 : PSU 2 OverTemper: Power Supply, Power Supply Failure detected was asserted.

PSU 2 OverTemper: Power Supply, Power Supply Failure detected was asserted.

The indicated power supply reports the internal sensing device reaches warning temperature and persists over 30 seconds.

Severity

Error

Alert Category

PSU - Power Supply event

SNMP Trap ID

141492681

User Action

  1. Check LED status of indicated power supply as
    • If Input Power Good Indicator (IN) is not lit on, check power cord and input voltage of indicated power supply.
    • If Output Power Good Indicator (OUT) is not lit on, reseat indicated power supply.
    • If Fault Indicator (!) is lit on, replace indicated power supply.
  2. If the event persists, please consult with technical service.