Install the enclosure into the rails

Follow the instructions to install the enclosure into the rails.

Procedure

  1. Remove all of the compute nodes, power supplies, fans, and SMM2 from the enclosure to reduce its weight.
    Figure 1. Removing components to reduce the enclosure’s weight
    Removing components to reduce the enclosure’s weight
  2. Align and place the enclosure onto the rails; then, slide it into the rack along the rails.
    Figure 2. Installing the enclosure into the rails
    Installing the enclosure into the rails

    2-person lift required
    CAUTION:
    Use safe practices when lifting the enclosure.
  3. Secure the captive screws.
  4. Reinstall all of the solution components that you previously removed.