Use this information to install the middle air baffle.
Watch the procedure
- A video of this procedure is available at YouTube.
Procedure
Figure 1. Middle air baffle installation
- Align the middle air baffle tabs with the baffle slots
located on both sides of the compute node in between DIMM connectors
1 to 8 and 9 to 16.
- Lower the middle air baffle into the compute node and press
it down until it is securely seated.
Attention:
For proper cooling and airflow, reinstall the middle air baffle
before you turn on the compute node. Operating the node without the
middle air baffle might damage node components.
Pay attention to the cables routed along the sidewalls of the
compute node as they may catch under the middle air baffle.
After you finish
- Reinstall the compute node into the enclosure (see Install a compute node in the enclosure).
Check the power LED on each node to make
sure it changes from fast blink to slow blink to indicate the node
is ready to be powered on.