Remove the front air baffle

Use this information to remove the front air baffle.

About this task
Attention: Read the Installation guidelines to ensure that you work safely.
Watch the procedure. A video of the installation process is available:

Procedure

Figure 1. Front air baffle removal
Front air baffle removal

  1. Make preparations for this task.
    1. Turn off the corresponding compute node on which you are going to perform the task.
    2. Remove the compute node from the enclosure (see Remove a compute node from the enclosure).
  2. Remove the front air baffle from the compute node.
    1. Slightly push the right and left release latches.
    2. Lift the front air baffle out of the compute node.
    Attention: For proper cooling and airflow, replace the front air baffle before you turn on the compute node. Operating the node without the front air baffle might damage node components.

After you finish

If you are instructed to return the component or optional device, follow all of the packaging instructions, and use any packaging materials for shipping that are supplied to you.