Use this information to remove the node front cover.
About this task
To avoid possible danger, read and follow the following safety
statement.
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present.
Only a qualified service technician is authorized to remove the covers
where the label is attached.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might
cause heating when shorted with metal, which might result in spattered
metal, burns, or both.
Watch the procedure
- A video of this procedure is available at YouTube.
Procedure
Figure 1. Node front cover removal
Remove the node front
cover from the compute node.
Loosen the screw on the node front cover.
Press on the two push points on the node front cover to slide
the cover toward the rear of the compute node until it has disengaged
from the node. Then, lift the cover away from the node.