FQXPMUP0204M : BMC communication failed: Execute the update cmd failure. Failed to update the firmware

Severity

Error

User Response

1. Restart BMC via BMC setting under uEFI setup on LXPM left panel.
2. Perform AC reset if the error exist exist.
   Note: When performing AC reset, after power off AC, wait several seconds before power on AC. After AC power is restored, power on the host system.
3. Use other Lenovo tools to perform the update (ex. XClarity Administrator, XClarity Controller, or the OneCLI utility).
4. If the error still occurs, contact service to support.