FQXSFMA0001M : DIMM [arg1] has been disabled due to an error detected during POST. [arg2]

DIMM [arg1] has been disabled due to an error detected during POST. [arg2]

Severity

Error

User Response

Complete the following steps:
  1. If the DIMM was disabled because of a memory fault, follow the procedure for that event.
  2. If no memory fault is recorded in the logs and no DIMM connector error LEDs are lit, re-enable the DIMM through the Setup utility or the OneCLI utility.
  3. If problem persists, Power cycle the server from the management console.
  4. Reset BMC to default settings.
  5. Reset UEFI to default settings.
  6. Update BMC and UEFI firmware.
  7. If problem persists, collect Service Data log.
  8. Contact Lenovo Support.