Fan power control (FPC) module

The following illustration shows the connectors and LEDs on the FPC module.

Figure 1. FPC connectors and LEDs
FPC connectors and LEDs
Table 1. FPC connectors and LEDs
1 Reset button hole 5 Check log LED (yellow)
2 Power LED (green) 6 Ethernet port activity (RJ-45) LED (green)
3 Activity LED (green) 7 Dedicated Ethernet port for FPC management access
4 Identification LED (blue) 8 Ethernet port link (RJ-45) LED (green)

1 Reset button: Press the button for 1 to 4 seconds, FPC reboots. Press over 4 seconds, FPC reboots and loads to the default settings.

2 Power-on LED: When this LED is lit (green), it indicates that the FPC has power.

3 Activity LED: When this LED is lit (green), it indicates that the FPC is actively controlling the enclosure.

4 Identification LED: When this LED is lit (blue), it indicates the enclosure location in a rack.

5 Check log LED: When this LED is lit (yellow), it indicates that a system error has occurred. Check the FPC event log for additional information.

6 Ethernet port activity (RJ-45) LED: When this LED is flashing (green), it indicates that there is activity through the remote management and console (Ethernet) port over the management network.

7 Dedicated Ethernet port for FPC management access: Use this connector to access FPC management.

8 Ethernet port link (RJ-45) LED: When this LED is lit (green), it indicates that there is an active connection through the remote management and console (Ethernet) port to the management network.