Install the tray cover

Use this information to install the tray cover.

Before you install the tray cover:

  1. Read the following section(s) to ensure that you work safely.
  2. Reinstall the blank bezel filler if you have removed it.

    Figure 1. Blank bezel filler installation
    Blank bezel filler installation

Complete the following steps to install the tray cover.

Watch the procedure. A video of the installation process is available:

  1. Position the cover on top of the tray.
  2. Slide the cover toward the front of the tray.
    Important: Before you slide the cover forward, make sure that all the tabs on the front, rear, and side of the cover engage the enclosure correctly. If all the tabs do not engage the enclosure correctly, it will be very difficult to remove the cover later.
  3. Make sure that the cover correctly engages all the insert tabs on the tray.
    Figure 2. Tray cover installation
    Tray cover installation

After you install the tray cover, complete the following steps:

  1. Reinstall the tray into the enclosure (see Install a DWC tray in the enclosure).