Remove an adapter

Use this information to remove an adapter.

Before you remove an adapter:
  1. Read the following section(s) to ensure that you work safely.
  2. Turn off the corresponding DWC tray that you are going to perform the task on.

  3. Remove the tray (see Install a DWC tray in the enclosure).

  4. Remove the tray cover (see Remove the tray cover).

Complete the following steps to remove an adapter.

Watch the procedure. A video of the installation process is available:

  1. Remove two silver Torx T10 screws; then, remove the retaining clamp.
    Figure 1. Screws and retaining clamp removal
    Screws and retaining clamp removal
  2. Carefully grasp the PCIe riser-cage assembly by its edges and remove it out of the node.
    Figure 2. PCIe riser-cage assembly removal
    PCIe riser-cage assembly removal
  3. Grasp the adapter by its edges and carefully pull it out of the PCIe riser-cage.
    Figure 3. Adapter removal
    Adapter removal

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.