FQXSPMA0002N : Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].

Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].

This message is for the use case when an implementation has detected a Memory DIMM configuration error has been corrected.

Severity

Error

Alert Category

Critical - Memory

Serviceable

Yes

CIM Information

Prefix:PLAT

and ID:0126

SNMP Trap ID

41

Automatically Notify Support

No

User Response

Complete the following steps:
  1. Could follow an uncorrectable memory error or failed memory test. Check the log and service that event first. DIMMs disabled by other errors or actions could cause this event.
  2. Verify that the DIMMs are installed in the correct population sequence.
  3. Update UEFI firmware.
  4. Replace the DIMM.
  5. If problem persists, collect Service Data log.
  6. Contact Lenovo Support.