Install the air baffle

Use this information to install the air baffle.

To avoid possible danger, read and follow the following safety statement.
  • S012
    hot surface
    CAUTION:
    Hot surface nearby.
Before you install the air baffle, complete the following steps:
  1. Read the following sections to ensure that you work safely.
  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

To install the air baffle, complete the following steps:

Watch the procedure. A video of the process is available:
Figure 1. Air baffle installation
Air baffle installation
Align the tabs on both sides of the air baffle with the corresponding slots; then, lower the air baffle into the chassis and press the air baffle down until it is securely seated.
After you install the air baffle, complete the following steps:
  1. Install the node if needed (see Install a compute node).

  2. Reconnect power cords and all external cables.