Install the lock position switch

Use this information to install the lock position switch.

Before you install the lock position switch, complete the following steps:
  1. Read the following sections to ensure that you work safely.
  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

To install the lock position switch, complete the following steps:

Watch the procedure. A video of the process is available:
  1. Hook the lock position switch onto the pin; then, slightly push it leftward.
  2. Install and fasten the screw.
    Figure 1. Lock position switch installation
    Lock position switch installation
  3. Carefully route the cables as the following illustration and connect the connector.
    Figure 2. Lock position switch cable
    Lock position switch cable

After you install the lock position switch, complete the following steps:

  1. Reinstall the PCIe riser cage (see Install the PCIe riser assembly).

  2. Install the node if needed (see Install a compute node).

  3. Reconnect power cords and all external cables.