Remove the dust filter in E1 enclosure bracket

Use this information to remove the dust filter in E1 enclosure bracket.

Before you remove the dust filter in E1 enclosure bracket, complete the following steps:
  1. Read the following sections to ensure that you work safely.
  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

  3. Remove the node from the enclosure if needed (see Remove a compute node).

  4. It is required to have dust filter when server is in operation.

To remove the dust filter in E1 enclosure bracket, complete the following steps:

Watch the procedure. A video of the process is available:

Remove the dust filter out of the bracket.
Figure 1. Dust filter removal
Dust filter removal

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.