Use this information to remove the intrusion switch cable.
Before you remove
the intrusion switch cable, complete the following steps:
- Read the following sections to ensure that you work safely.
Turn off the server. Disconnect the power cords and all external cables (see Power off the server).
Remove the node from the enclosure if needed (see Remove a compute node).
To remove the intrusion switch cable, complete the following steps:
Watch the procedure
- A video of this procedure is available at YouTube.
- Carefully lift the intrusion switch carrier out of the
server.
Figure 1. Intrusion switch cable removal
- Remove the intrusion switch cable from the carrier.
Figure 2. Intrusion switch cable removal
If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.