Remove the lock position switch

Use this information to remove the lock position switch.

To avoid possible danger, read and follow the following safety information.

S002
disconnect all power
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
S009
Attention
CAUTION:
To avoid personal injury, disconnect the fan cables before removing the fan from the device.
Before you remove the lock position switch, complete the following steps:Before you install the lock position switch, complete the following steps:
  1. Read the following sections to ensure that you work safely.
  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

  3. Remove the node from the enclosure if needed (see Remove a compute node).

  4. Remove the PCIe riser cage (see Remove the PCIe riser assembly).

To remove the lock position switch, complete the following steps:

Watch the procedure. A video of the process is available:
  1. Disconnect the cable.
    Figure 1. Lock position switch cable
    Lock position switch cable
  2. Remove the screw.
  3. Slightly push the lock position switch rightward and remove it from the server.
    Figure 2. Lock position switch removal
    Lock position switch removal

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.