Remove the power distribution module

Use this information to remove the power distribution module.

Before you remove the power distribution module, complete the following steps:

  1. Read the following sections to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

  3. Remove the node from the enclosure if needed (see Remove a compute node).

To remove the power distribution module, complete the following steps:

Watch the procedure. A video of the process is available:
  1. Remove the screw on the bottom of the server.
  2. Remove the screw on the rear of the server.
  3. Carefully hold the tab and pull the power distribution module out of the server.
    • 12 V power distribution module removal
      Figure 1. 12 V power distribution module removal
      12 V power distribution module removal
    • -48 V power distribution module removal
      Figure 2. -48 V power distribution module removal
      -48V power distribution module removal

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.

Parent topic: Power distribution module replacement