Remove the top cover

Use this information to remove the top cover.

To avoid possible danger, read and follow the following safety information.

S012
hot surface
CAUTION:
Hot surface nearby.
S014
shock hazard
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached.
S033
240VA shock hazard
CAUTION:

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

Before you remove the top cover, complete the following steps:

  1. Read the following sections to ensure that you work safely.
  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

To remove the top cover, complete the following steps:

Watch the procedure. A video of the process is available:
Figure 1. Top cover removal
Top cover removal
  1. Press on the release button and the push point at the same time; then, slide the cover toward the rear of the server.
  2. Lift the top cover away from the server.

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.