Rear view

The rear of the server provides access to several components, including the power supplies, PCIe adapters, serial port, and Ethernet port.

Figure 1. Rear view - 12V power distribution module (PDM)
Rear view - 12V power adapter model
Table 1. Rear view - 12V power adapter model
1 WLAN Antenna connectors (available only when M.2 WLAN module is installed) 4 USB 2.0 connectors
2 RS-232 port (RJ-45) 5 Power connector 1
3 LTE Antenna connectors (available only when M.2 LTE module is installed) 6 Power connector 2
Figure 2. Rear view - -48V power distribution module (PDM)
Rear view - -48V power adapter model
Table 2. Rear view - -48V power adapter model
1 WLAN Antenna connectors (available only when M.2 WLAN module is installed) 5 Vin- terminal
2 RS-232 port (RJ-45) 6 Vin+ terminal
3 LTE Antenna connectors (available only when M.2 LTE module is installed) 7 GND terminal
4 USB 2.0 connectors 8 Power connector

Install covers

Install the covers, or connectors could be damaged without proper protection of the covers.

Figure 3. Covers
Covers
Table 3. Covers
1 Antenna cover x4 (if no antennas are installed, use antenna port filler, see Front view) 2 Power adapter cover