LOM packages

The following illustrations show the wireless enabled LOM package, 10G SFP+ LOM package, and 10G BASE-T LOM Package.

Depending on the server configuration, connect one of the LOM packages to the LOM module connector on the system board (see System-board connectors).

Wireless enabled LOM package

Wireless enabled LOM package enables the wireless function of the server. The connector on the package is designed for M.2 WLAN/LTE wireless adapter. There are two types of the wireless adapter, both are installed in the same method. For more information, see Install the M.2 WLAN/LTE wireless adapter.

Figure 1. Wireless enabled LOM package
Wireless enabled LOM package
Table 1. Wireless enabled LOM package
1 M.2 WLAN/LTE wireless connector 2 Service-only connector
Note: The service-only connector is available on some models and reserved for service only.

10G SFP+ LOM package

Figure 2. 10G SFP+ LOM package
10G SFP+ LOM package

10G BASE-T LOM Package

Figure 3. 10G BASE-T LOM Package
10G BASE-T LOM Package