Install the front handle

Use this information to install the front handle.

About this task

Attention:
Watch the procedure. A video of the installation and removal process is available:

Procedure

  1. Carefully turn the compute node to the upside down orientation.
  2. Install the front handle.
    1. Orient the front handle so that the release latch is toward the middle of the compute node. See the following illustration for reference.
    2. Align the hole on the front handle with the hole on the compute node.
    3. Install a new screw to the secure the front handle with a T15 Torx screwdriver.
    Figure 1. Front handle installation
    Front handle installation
After you finish
  1. Proceed to complete the parts replacement. See Complete the parts replacement.