Limited maximal number of compute node in the same chassis

The following table describes the maximal number of SN550 V2 compute node that can be installed in the Lenovo Flex System Enterprise Chassis.

The exact maximal number of supported 1-bay nodes is determined by input voltage and power redundancy policy. See the following table for detailed combinations, or alternatively, refer to Lenovo Capacity Planner for more details.

Note that the values in this table are based on power policy with compute node throttling allowed.

Table 1. Limited maximal number of SN550 V2 in the same chassis
2500 W power output (200-208 V ac)
Processor TDP
  • N+1
  • N=4
  • 5 PSUs
  • With throttle
  • N+1
  • N=3
  • 4 PSUs
  • With throttle
  • N+N
  • N=3
  • 6 PSUs
  • With throttle
  • N+1
  • N=5
  • 6 PSUs
  • No throttle
  • N+N
  • N=3
  • 6 PSUs
  • No throttle
105 W 14 14 14 14 9
120 W 14 13 14 14 8
135 W 14 12 13 13 8
140 W 14 12 13 13 8
150 W 14 12 12 12 7
165 W 14 11 11 12 7
185 W 13 10 10 11 6
195 W 13 9 9 10 6
205 W 13 9 9 10 6
230W 12 9 9 9 5
2745 W power output (220-240 V ac)
Processor TDP
  • N+1
  • N=4
  • 5 PSUs
  • With throttle
  • N+1
  • N=3
  • 4 PSUs
  • With throttle
  • N+N
  • N=3
  • 6 PSUs
  • With throttle
  • N+1
  • N=5
  • 6 PSUs
  • No throttle
  • N+N
  • N=3
  • 6 PSUs
  • No throttle
105 W 14 14 14 14 10
120 W 14 13 14 14 9
135 W 14 12 13 14 9
140 W 14 12 13 14 9
150 W 14 12 12 13 8
165 W 14 11 11 13 8
185 W 14 11 11 12 7
195 W 14 10 10 11 6
205 W 14 10 10 11 6
230W 13 9 9 10 6