Remove the RAID adapter

Use this information to remove the RAID adapter.

About this task

Attention:
Watch the procedure. A video of the installation and removal process is available:

Procedure

  1. Remove the compute node cover to make preparations for your compute node. See Remove the compute node cover.
  2. Remove the RAID adapter.
    1. Rotate the lever on the 2.5-inch drive backplane.
    2. The RAID adapter disengages from the connector on the backplane.
    3. Lift up the RAID adapter and remove it from the compute node.
    Figure 1. RAID adapter removal
    RAID adapter removal
After you finish