Remove the EDSFF drive cage

Use this information to remove the EDSFF drive cage.

About this task

Attention:
Watch the procedure. A video of the installation and removal process is available:

Procedure

  1. Make preparations for your compute node.
    1. Remove the compute node cover. See Remove the compute node cover.
    2. Remove any EDSFF drive or EDSFF drive bay filler. See Remove an EDSFF hot-swap drive.
      Attention:

      Only touch and hold the EDSFF drive handle when removing EDSFF drive from the compute node. EDSFF drive may be damaged if you touch parts other than the handle before the EDSFF drive is completely removed out of the compute node.

    3. Remove the front bezel. See Remove the front bezel.
  2. Remove the EDSFF drive cage.
    1. Press and hold the release latch on the EDSFF drive cage.
    2. Pull the EDSFF drive cage out of the compute node.
    Figure 1. EDSFF drive cage removal
    EDSFF storage cage removal
After you finish

If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.