Install the compute node cover

Use this procedure to install the compute node cover.

About this task

Attention:
  • Read Safety inspection checklist and Installation Guidelines to ensure that you work safely.

  • If you are replacing the cover, make sure that you have the system service label kit on hand for use during the replacement procedure. See Parts list for more information.

  • You cannot insert the compute node into the Lenovo Flex System Enterprise Chassis until the cover is installed and closed. Do not attempt to override this protection.

Watch the procedure. A video of the installation and removal process is available:

Procedure

  1. Make sure that all components have been reassembled correctly and that no tools or loose screws are left inside the compute node.
  2. Make sure the retention clips for the I/O expansion adapters are all in closed position.
  3. Make sure the air baffle is installed. See Install the air baffle.
  4. Install the top cover.
    1. Align the posts inside the cover with the slots on the sides of compute node.
    2. Place down the cover on the compute node.
    3. Hold the front of the compute node and slide the cover forward to the closed position, until it clicks into place.
    Figure 1. Compute node cover installation
    Compute node cover installation