UEFI events organized by severity

The following table lists all UEFI events, organized by severity (Information, Error, and Warning).

Table 1. Events organized by severity
Event ID Message String Severity
FQXSFIO0005I An intra-board UPI has been disabled on the link between processor [arg1] port [arg2] and processor [arg3]port [arg4] because of UPI topology downgrade. Informational
FQXSFIO0006I An inter-board UPI has been disabled on the link between processor [arg1] port [arg2] and processor [arg3]port [arg4] because of UPI topology downgrade. Informational
FQXSFIO0015I IFM: System reset performed to reset adapters. Informational
FQXSFIO0018I IFM: Configuration too large for compatibility mode. Informational
FQXSFIO0020J PCIe Isolation has occurred in PCIe slot [arg1]. The adapter may not operate correctly. Informational
FQXSFIO0021J PCIe Error Recovery has occurred in PCIe slot [arg1]. The adapter may not operate correctly. Informational
FQXSFMA0001I DIMM [arg1] Disable has been recovered. [arg2] Informational
FQXSFMA0002I The uncorrectable memory error state has been cleared. Informational
FQXSFMA0006I [arg1] DIMM [arg2] has been detected, the DIMM serial number is [arg3]. Informational
FQXSFMA0007I [arg1] DIMM number [arg2] has been replaced. [arg3] Informational
FQXSFMA0008I DIMM [arg1] POST memory test failure has been recovered. [arg2] Informational
FQXSFMA0009I Invalid memory configuration for Mirror Mode has been recovered. [arg1] Informational
FQXSFMA0010I Invalid memory configuration for Sparing Mode has been recovered. [arg1] Informational
FQXSFMA0011I Memory population change detected. [arg1] Informational
FQXSFMA0012I The PFA of DIMM [arg1] has been deasserted. Informational
FQXSFMA0013I Mirror Fail-over complete. DIMM [arg1] has failed over to to the mirrored copy. [arg2] Informational
FQXSFMA0014I Memory spare copy initiated. [arg1] Informational
FQXSFMA0015I Memory spare copy has completed successfully. [arg1] Informational
FQXSFMA0026I DIMM [arg1] Self-healing, attempt post package repair (PPR) at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7] Informational
FQXSFMA0029I The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM. [arg2] Informational
FQXSFMA0046I DIMM [arg1] is disabled because it is Intel Optane PMEM that is not supported on current platform Informational
FQXSFPU0020I The UEFI firmware image capsule signature is invalid. Informational
FQXSFPU0021I The TPM physical presence state has been cleared. Informational
FQXSFPU0023I Secure Boot Image Verification Failure has been cleared as no failure in this round boot. Informational
FQXSFPU4034I TPM Firmware recovery is finished, rebooting system to take effect. Informational
FQXSFPU4038I TPM Firmware recovery successful. Informational
FQXSFPU4041I TPM Firmware update is in progress. Please DO NOT power off or reset system. Informational
FQXSFPU4042I TPM Firmware update is finished, rebooting system to take effect. Informational
FQXSFPU4044I The current TPM firmware version could not support TPM version toggling. Informational
FQXSFPU4046I TPM Firmware will be updated from TPM1.2 to TPM2.0. Informational
FQXSFPU4047I TPM Firmware will be updated from TPM2.0 to TPM1.2. Informational
FQXSFPU4049I TPM Firmware update successful. Informational
FQXSFPU4059I User requested to skip freezing lock of AHCI-attached SATA drives. System UEFI accepted the request and will execute priot to OS boot. Informational
FQXSFPU4060I Skipped freezing lock of AHCI-attached SATA drives. Informational
FQXSFPU4061I Restored default locking behavior of AHCI-attached SATA drives. Informational
FQXSFPU4080I Host Power-On password has been changed. Informational
FQXSFPU4081I Host Power-On password has been cleared. Informational
FQXSFPU4082I Host Admin password has been changed. Informational
FQXSFPU4083I Host Admin password has been cleared. Informational
FQXSFPU4084I Host boot order has been changed. Informational
FQXSFPU4085I Host WOL boot order has been changed. Informational
FQXSFSM0007I The XCC System Event log (SEL) is full. Informational
FQXSFSR0002I [arg1] GPT corruption recovered, DiskGUID: [arg2] Informational
FQXSFDD0001G DRIVER HEALTH PROTOCOL: Missing Configuration. Requires Change Settings From F1. Warning
FQXSFDD0002M DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. Warning
FQXSFDD0003I DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. Warning
FQXSFDD0005M DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'. Warning
FQXSFDD0006M DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver. Warning
FQXSFDD0007G Security Key Lifecycle Manager (SKLM) IPMI Error. Warning
FQXSFIO0008M An intra-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. Warning
FQXSFIO0009M An inter-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. Warning
FQXSFIO0013I The device found at Bus [arg1] Device [arg2] Function [arg3] could not be configured due to resource constraints. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. Warning
FQXSFIO0016M IFM: Reset loop avoided - Multiple resets not allowed. Warning
FQXSFIO0032M PCIe Correctable Error PFA Threshold limit has been exceeded at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical bay number is [arg6]. Warning
FQXSFIO0033J PCIe Link Width has degraded from [arg1] to [arg2] in physical bay number [arg3]. Warning
FQXSFIO0034J PCIe Link Speed has degraded from [arg1] to [arg2] in physical bay number [arg3]. Warning
FQXSFMA0012L The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4] Warning
FQXSFMA0016M Memory spare copy failed. [arg1] Warning
FQXSFMA0027M DIMM [arg1] Self-healing, attempt post package repair (PPR) failed at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7] Warning
FQXSFMA0028M DIMM [arg1] Self-healing, attempt post package repair (PPR) exceeded DIMM level threshold [arg2] at Rank [arg3] Sub Rank [arg4] Bank [arg5] Row [arg6] on Device [arg7]. [arg8] Warning
FQXSFMA0030K Intel Optane PMEM [arg1] Percentage Remaining is less than [arg2]% and still functioning. Warning
FQXSFMA0031K Intel Optane PMEM [arg1] has reached 1% remaining spares block and still functioning. Warning
FQXSFMA0033M Intel Optane PMEM persistent memory interleave set has [arg1] PMEMs(DIMM [arg2]), [arg3] DIMMs' location is not correct. Warning
FQXSFMA0034M DIMM [arg1] (UID: [arg2]) of Intel Optane PMEM persistent memory interleave set should be moved to DIMM slot [arg3] in sequence. Warning
FQXSFMA0035M Intel Optane PMEM interleave set should have [arg1] PMEMs, but [arg2] PMEMs are missing. Warning
FQXSFMA0036M DIMM [arg1] (UID: [arg2]) of Intel Optane PMEM persistent memory interleave set is missing. Warning
FQXSFMA0037G Intel Optane PMEM interleave set (DIMM [arg1]) is migrated from another system (Platform ID: [arg2]), these migrated PMEMs are not supported nor warranted in this system. Warning
FQXSFMA0038K All Intel Optane PMEMs could not be auto unlocked because of no passphrase. Warning
FQXSFMA0039K One or more Intel Optane PMEMs could not be auto unlocked because of invalid passphrase. Warning
FQXSFMA0040K Invalid Intel Optane PMEM configuration detected. Please verify PMEM configuration is valid. Warning
FQXSFMA0041K Near Memory/Far Memory ratio (1:[arg1].[arg2]) for Intel Optane PMEM configuration is not in recommended range (1:4 - 1:16). Warning
FQXSFMA0047M SPD CRC checking failed on DIMM [arg1]. [arg2] Warning
FQXSFPU0022G The TPM configuration is not locked. Warning
FQXSFPU0023G Secure Boot Image Verification Failure Warning. Warning
FQXSFPU0033G Processor has been disabled. Warning
FQXSFPU4033F TPM Firmware recovery is in progress. Please DO NOT power off or reset system. Warning
FQXSFPU4035M TPM Firmware recovery failed. TPM chip may be damaged. Warning
FQXSFPU4040M TPM selftest has failed. Warning
FQXSFPU4043G TPM Firmware update aborted. System is rebooting... Warning
FQXSFPU4050G Failed to update TPM Firmware. Warning
FQXSFPU4051G Undefined TPM_POLICY found Warning
FQXSFPU4052G TPM_POLICY is not locked Warning
FQXSFPU4053G System TPM_POLICY does not match the planar. Warning
FQXSFPU4054G TPM card logical binding has failed. Warning
FQXSFPU4057I Secure boot variable is being accessed with an unauthorized password, reset the system immediately to recover. Warning
FQXSFPU4058I Secure Boot Setting is changed from enabled to disabled Warning
FQXSFPW0001L CMOS has been cleared. Warning
FQXSFSM0002N Boot Permission denied by Management Module: System Halted. Warning
FQXSFSM0003N Timed Out waiting on boot permission from Management Module: System Halted. Warning
FQXSFSM0004M An XCC communication failure has occurred. Warning
FQXSFSR0001M [arg1] GPT corruption detected, DiskGUID: [arg2] Warning
FQXSFSR0003G The number of boot attempts has been exceeded. No bootable device found. Warning
FQXSFTR0001L An invalid date and time have been detected. Warning
FQXSFDD0004M DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller. Error
FQXSFIO0005M An intra-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. Error
FQXSFIO0006M An inter-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. Error
FQXSFIO0007M An error has been detected by the IIO on Bus [arg1]. The value of Global Fatal Error Status register is [arg2]. The value of Global Non-Fatal Error Status register is [arg3]. Please check error logs for additional downstream device error data. Error
FQXSFIO0010M An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. Error
FQXSFIO0011M A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. Error
FQXSFIO0012M A PCIe system error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. Error
FQXSFIO0014J A bad option ROM checksum was detected for the device found at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. Error
FQXSFIO0017M IFM: Error communicating with the XCC - IFM may not be deployed correctly. Error
FQXSFIO0019J PCIe Resource Conflict [arg1]. Error
FQXSFIO0022J PCIe Link Width has degraded from [arg1] to [arg2] in PCIe slot [arg3]. Error
FQXSFIO0023J PCIe Link Speed has degraded from [arg1] to [arg2] in PCIe slot [arg3]. Error
FQXSFIO0031M An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical bay number is [arg6]. Error
FQXSFMA0001M DIMM [arg1] has been disabled due to an error detected during POST. [arg2] Error
FQXSFMA0002M An uncorrectable memory error has been detected on DIMM [arg1] at address [arg2]. [arg3] Error
FQXSFMA0003K A memory mismatch has been detected. Please verify that the memory configuration is valid. [arg1] Error
FQXSFMA0004N No system memory has been detected. [arg1] Error
FQXSFMA0005N Memory is present within the system but could not be configured. Please verify that the memory configuration is valid. [arg1] Error
FQXSFMA0008M DIMM [arg1] has failed the POST memory test. [arg2] Error
FQXSFMA0009K Invalid memory configuration for Mirror Mode. Please correct memory configuration. [arg1] Error
FQXSFMA0010K Invalid memory configuration for Sparing Mode. Please correct memory configuration. [arg1] Error
FQXSFMA0023M Error has occurred in NVDIMM flash. NVDIMM backup/restore may not operate correctly. [arg1] Error
FQXSFMA0024M Error has occurred in NVDIMM Supercap. NVDIMM backup/restore may not operate correctly. [arg1] Error
FQXSFMA0025M NVDIMM Supercap has been disconnected. NVDIMM will lose its backup ability until this is corrected. [arg1] Error
FQXSFMA0027K Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid.[arg1] Error
FQXSFMA0028K Memory Capacity exceeds CPU limit. [arg1] Error
FQXSFMA0032M Intel Optane PMEM [arg1] has no remaining spares block. Error
FQXSFMA0042K Intel Optane PMEM is not supported by processor of this system. Error
FQXSFMA0046M DIMM [arg1] is disabled because it is Intel Optane PMEM that is not supported on current platform Error
FQXSFPU0001N An unsupported processor has been detected. Error
FQXSFPU0002N An invalid processor type has been detected. Error
FQXSFPU0003K A processor mismatch has been detected between one or more processors in the system. Error
FQXSFPU0004K A discrepancy has been detected in the number of cores reported by one or more processors within the system. Error
FQXSFPU0005K A mismatch between the maximum allowed UPI link speed has been detected for one or more processors. Error
FQXSFPU0006K A power segment mismatch has been detected for one or more processors. Error
FQXSFPU0007K Processors have mismatched Internal DDR Frequency Error
FQXSFPU0008K A core speed mismatch has been detected for one or more processors. Error
FQXSFPU0009K An external clock frequency mismatch has been detected for one or more processors. Error
FQXSFPU0010K A cache size mismatch has been detected for one or more processors. Error
FQXSFPU0011K A cache type mismatch has been detected for one or more processors. Error
FQXSFPU0012K A cache associativity mismatch has been detected for one or more processors. Error
FQXSFPU0013K A processor model mismatch has been detected for one or more processors. Error
FQXSFPU0014N A processor family mismatch has been detected for one or more processors. Error
FQXSFPU0015K A processor stepping mismatch has been detected for one or more processors. Error
FQXSFPU0016N A processor within the system has failed the BIST. Error
FQXSFPU0017G A processor microcode update failed. Error
FQXSFPU0018N CATERR(IERR) has asserted on processor [arg1]. Error
FQXSFPU0019N An uncorrectable error has been detected on processor [arg1]. Error
FQXSFPU0030N A firmware fault has been detected in the UEFI image. Error
FQXSFPU0031N The number of POST attempts has reached the value configured in F1 setup.The system has booted with default UEFI settings. User specified settings have been preserved and will be used on subsequent boots unless modified before rebooting. Error
FQXSFPU0034L The TPM could not be initialized properly. Error
FQXSFPU0035N A 3-strike timeout has occurred on processor [arg1]. Error
FQXSFPU4056M TPM card is changed, need install back the original TPM card which shipped with the system. Error
FQXSFSM0008M Boot permission timeout detected. Error