Configuration tabs settings are used to manage SMM module.
Figure 1. Configuration
There are twelve sections:
Firmware Update
SMTP
SNMP
PEF
Network Configuration
Time Setting
User Account
Account Security
Service
Web Certificate
NTP
Backup and Restore
Note: By pressing hardware reset button for more than
4 seconds, all settings (except Time Setting) can be restored
to out-of-factory default settings.
Firmware Update
The firmware update process comes in two phases. During firmware upload stage, you can choose the location where the firmware image is stored. SMM would check the image header information as validation.
SMTP/SNMP/PEF
Configured SMTP and SNMP traps allow user to monitor the enclosure for selected events. SMTP/SNMP trap event types can be set in the PEF (Platform Event Filter) page.
Network Configuration
You can modify networking parameters in Network configuration.
Time Setting
This page is used to configure system time.
User Account User Account page allows you to manage user roles.
Account Security
Advanced account security setting allows you to set different values for the following rules.
Services
You can configure different HTTPS ports for connection and enable/disable IPMI service state at Services page.
Web Certificate
The web certificate page displays current certificate information.
Backup and Restore
Configurations are automatically saved when they are set or modified. Back up or restore the configurations to or from a local device.