You can generate and print a PDF of this page, and then use the following worksheet to record FC storage configuration information. You need this information to perform provisioning tasks.

The illustration shows a host connected to a DE Series storage array in two zones. One zone is indicated by the blue line; the other zone is indicated by the red line. Any single port has two paths to the storage (one to each controller).

port identifiers host and target conf lin

Host identifiers

Callout No. Host (initiator) port connections WWPN

1

Host

not applicable

2

Host port 0 to FC switch zone 0

7

Host port 1 to FC switch zone 1

Target identifiers

Callout No. Array controller (target) port connections WWPN

3

Switch

not applicable

6

Array controller (target)

not applicable

5

Controller A, port 1 to FC switch 1

9

Controller A, port 2 to FC switch 2

4

Controller B, port 1 to FC switch 1

8

Controller B, port 2 to FC switch 2

Mapping host

Mapping host name

Host OS type