You must assign a volume to a host or a host cluster so it can be used for I/O operations.

Before you begin

Keep these guidelines in mind when you assign volumes to hosts:

About this task

A volume assignment grants a host or host cluster access to that volume in a storage array.

All unassigned volumes are displayed during this task, but functions for hosts with or without Data Assurance (DA) apply as follows:

The ability to assign a volume is unavailable under these conditions:

  1. From the Manage page, select the storage array with the host connection.

  2. Select Provisioning  Configure Hosts.

    The Configure Hosts page opens.

  3. Select the host or host cluster to which you want to assign volumes, and then click Assign Volumes.

    A dialog box appears that lists all the volumes that can be assigned. You can sort any of the columns or type something in the Filter box to make it easier to find particular volumes.

  4. Select the check box next to each volume that you want to assign or select the check box in the table header to select all volumes.

  5. Click Assign to complete the operation.


After successfully assigning a volume or volumes to a host or a host cluster, the system performs the following actions: