From the Local User Roles tab, you can view the mappings of the user profiles to the default roles. These mappings are part of the RBAC (role-based access controls) enforced in the storage array.

Before you begin

You must be logged in with a user profile that includes Security admin permissions. Otherwise, the Access Management functions do not appear.

About this task

The user profiles and mappings cannot be changed. Only passwords can be modified.

Steps

  1. Select Settings  Access Management.

  2. Select the Local User Roles tab.

    The user profiles are shown in the table:

    • Root admin (admin) — Super administrator who has access to all functions in the system. This user profile includes all roles.

    • Storage admin (storage) — The administrator responsible for all storage provisioning. This user profile includes the following roles: Storage Admin, Support Admin, and Monitor.

    • Security admin (security) — The user responsible for security configuration, including access management, certificate management, and secure-enabled drive functions. This user profile includes the following roles: Security Admin and Monitor.

    • Support admin (support) — The user responsible for hardware resources, failure data, and firmware upgrades. This user profile includes the following roles: Support Admin and Monitor.

    • Monitor (monitor) — A user with read-only access to the system. This user profile includes only the Monitor role.