San Manager 4.2 - Create synchronous mirrored pair

To configure synchronous mirroring, you create a mirrored pair that includes a primary volume on the local array and a secondary volume on the remote array.

Before you create a mirrored pair, meet the following requirements for SAN Manager :

The Web Services Proxy service must be running.
SAN Manager must be running on your local host through an HTTPS connection.
SAN Manager must be showing valid SSL certificates for the storage array. You can accept a self-signed certificate or install your own security certificate using SAN Manager and navigating to Certificate > Certificate Management.

Also be sure to meet the following requirements for storage arrays:

The two storage arrays you plan to use for mirroring are discovered in SAN Manager .
Each storage array must have two controllers.
Each controller in both the primary array and secondary array must have an Ethernet management port configured and must be connected to your network.
The storage arrays have a minimum firmware version of 11.60.2. (They can each run different OS versions.)
You must know the password for the local and remote storage arrays.
Your local and remote storage arrays are connected through a Fibre Channel fabric.
You have created both the primary and secondary volumes that you want to use in the synchronous mirror relationship.

The process to create synchronous mirrored pairs is a multi-step procedure.