Reset storage array diagnostic data

The reset storageArray diagnosticData command resets the NVSRAM that contains the diagnostic data for the storage array.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles

To execute this command on an storage array, you must have the Storage Admin role.

Context

This command does not delete the diagnostic data. This command replaces the Needs Attention status with the Diagnostic Data Available status. The old diagnostic data is written over automatically when new data is captured. The memory that contains the diagnostic data is also cleared when the controllers reboot. Before you reset the diagnostic data, use the save storageArray diagnosticData command to save the diagnostic data to a file.

Attention: Run this command only with the assistance of technical support.

Syntax

reset storageArray diagnosticData

Parameters

None.