The show storageArray unreadableSectors command returns a table of the addresses of all of the sectors in the storage array that cannot be read.
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
To execute this command on an storage array, you must have the Storage Admin or Storage Monitor role.
The returned table is organized with column headings for the following information:
Volume user label
Logical unit number (LUN)
Accessible by (host or host group)
Date/time
Volume-relative logical block address (hexadecimal format – 0xnnnnnnnn)
Drive location (tray t, slot s)
Drive-relative logical block address (hexadecimal format – 0xnnnnnnnn)
Failure type
The data is sorted first by the volume user label and second by the logical block address (LBA). Each entry in the table corresponds to a single sector.
show storageArray unreadableSectors
None.