The show storageArray lunMappings command returns information from the storage array profile about the logical unit number (LUN) mappings in the storage array.
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
To execute this command on an storage array, you must have the Storage Admin or Storage Monitor role.
Default group LUN mappings are always shown. If you run this command without any parameters, this command returns all of the LUN mappings.
show storageArray lunMappings (host ["hostName"] |
hostgroup ["hostGroupName"])
| Parameter | Description |
|---|---|
| host | The name of a specific host for which you want to see the LUN mappings. Enclose the host name in double quotation marks (" ") inside of square brackets ([ ]). |
| hostGroup | The name of a specific host group for which you want to see the LUN mappings. Enclose the host group name in double quotation marks (" ") inside of square brackets ([ ]). |
This command returns host topology information similar to this example.
MAPPINGS (Storage Partitioning - Enabled (0 of 16 used))
VOLUME NAME LUN CONTROLLER ACCESSIBLE BY VOLUME STATUS
Access Volume 7
A
,
B
Default Group Optimal
21 21
B
Default Group Optimal
22 22
B
Default Group Optimal