The show snmpSystemVariables command returns information about the Simple Network Management Protocol (SNMP) system variables. The system variables are maintained in a Management Information Base II (MIB-II) database.
This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.
To execute this command on an storage array, you must have the Storage Admin or Support Admin or Storage Monitor role.
show snmpSystemVariables
None.
This command returns SNMP system variables information similar to this example.
SYSTEM VARIABLES
Sys Name: NONE
Sys Contact: NONE
Sys Location: NONE