Update SNMP MIB II system group variables

The set snmpSystemVariables command changes the system variables for the Simple Network Management Protocol (SNMP).

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles

To execute this command on an storage array, you must have the Storage Admin or Support Admin role.

Context

The following system variables are maintained in a Management Information Base II (MIB-II) database:

Syntax

set snmpSystemVariables
[sysName=newSystemName]
[sysContact=contactName]
[sysLocation=systemLocation]

Parameters

Parameter Description
sysName The new name that you want to give to the SNMP system. Use standard SNMP and MIB conventions for the system name. Enclose the SNMP system name in square brackets ([ ]).
sysContact The name of contact person for the managed system with information on how to contact this person. Enclose the SNMP contact name in square brackets ([ ]).
sysLocation The physical location of the system, such as "3rd flr". Enclose the SNMP system location in square brackets ([ ]).