Command Line Interface 11.50.2 - Show storage array DBM database

The show storageArray dbmDatabase command retrieves and shows metadata for the on-board backup locations of a storage array. When there are multiple backup locations, metadata is shown for each location.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.

Roles

To execute this command on an storage array, you must have the Storage Admin or Storage Monitor role.

Syntax

show storageArray dbmDatabase

Parameters

None.

Notes

This command returns the configuration database information in a format similar to this example.

`Configuration Database MetadataLast Host Backup: <date stamp>`
`CTL`	`LOCATION`	`REVISION`	`ID`	`GEN NUMBER`	`STATUS`	`ACCESS MODE`
`A`	`Cache`	`X.Y`	`999999`	`999999`	`R/W`	`Optimal`
`B`	`Cache`	`X.Y`	`999999`	`999999`	`R/W`	`Optimal`
`N/A`	`Disk`	`X.Y`	`999999`	`999999`	`R/W`	`Optimal`