Test SNMP trap destination

The start snmpTrapDestination command tests the connection and identification of the trap receiver for a specific Simple Network Management Protocol (SNMP) community. This command tests the trap destination by sending a trap message to the trap receiver.

Supported Arrays

This command applies to an individual DE2000H, DE4000H, DE4000F, DE6000H, or DE6000F storage array.


To execute this command on an storage array, you must have the Storage Admin or Support Admin role.


start snmpTrapDestination trapReceiverIP=ipAddress 


Parameter Description
trapReceiverIP The IP address of the SNMP manager to which you want to send trap messages.
communityName The name of the SNMP community for which you want to send trap messages.